New Windows Sealed Into Sound Openings
Window Replacement in Farmington Hills for rotted frames, failed glass, and windows that leak air even when locked.
Much of the housing in Farmington Hills went up between the 1960s and 1980s, when wood and aluminum windows with single-pane or early double-pane glass were standard, and many openings are now on their first or second set of windows. 800 New Look, LLC replaces windows in those homes, removing old units, installing new frames and glass, and sealing each opening against air and water leaks. If your frames are soft, several panes fog, or sashes no longer open, you will notice the difference the first time a new window closes and seals.
Replacement starts with how each opening is built. A retrofit installation sets the new window inside the existing frame and leaves trim, brick, and siding undisturbed, while a new construction installation strips the opening back so frame, flashing, and sill can be rebuilt; the choice depends on whether the existing frame is solid and square.
Book a free in-home estimate to compare retrofit and full-frame options for your windows.
What You Notice After New Windows Go In
Sealing is where replacement windows succeed or fail. Each window is set level and square, shimmed so the sash operates without binding, and the gap around it is insulated before the exterior is caulked and interior trim finished, with flashing lapped on new construction installs to direct water away from the wall.
Once the windows are in, drafts near the sill stop and the glass stays clear. Every sash opens and locks properly, and the exterior perimeter shows a continuous seal instead of cracked caulk or gaps.
Window style, frame material, and glass package all shape the result, so the estimate covers which openings need replacement and which could be repaired. Rot found once an old window comes out can extend the scope to the sill or framing. 800 New Look, LLC has 21 years in business and handles both retrofit and new construction installation.
Answers About Replacing Your Windows
These questions cover how replacement windows are installed and what to look for in a finished job.
What is the difference between retrofit and new construction window installation?
A retrofit window fits inside your existing frame, while new construction replaces the frame down to the rough opening so rotted framing and flashing can be addressed.
How should you prepare a room for window replacement?
Move furniture a few feet from each window, take down blinds and curtains, and clear sills of anything fragile.
How does the construction of a Farmington Hills home change the installation?
Many Farmington Hills homes pair brick veneer on the lower level with siding above, so openings in brick often suit retrofit installs while sided walls allow full-frame replacement.
What signs of quality should you check in a finished installation?
Look for even gaps around the sash, a continuous bead of exterior sealant, and interior trim sitting tight to the wall.
How do you maintain new windows after installation?
Keep tracks and sills clear of debris, check exterior caulk yearly for cracks, and clean glass with a non-abrasive cleaner.
Replacing windows is a chance to correct the openings as well as the glass. 800 New Look, LLC also replaces windows in Novi, West Bloomfield, Northville, Plymouth and Howell. Talk through your project to get a clear scope for every opening in the house.